Maintaining your Husqvarna motorcycles is the only way to enjoy their value for as long as possible. Don’t just do the usual checkups and repairs and leave it at that point; you need to take a step further and ensure your motorbike looks appealing. So how can you make this happen? How do you make your bike look new? The answers to those questions are available in the details below. Each point puts your motorbike a step closer to looking new. By the time you finish with all the steps, you will end up with a motorcycle that has a great look and an appealing finish.
Replace seats and covers
With time, you will notice that the seats and covers of your Husky motorcycles will start depreciating in quality. That is usually due to wear and tear, which results from constant use of your bike. Depreciation of the seats and covers can also arise after prolonged exposure of your motorbike to harsh environmental conditions. You should thus go ahead and remove the existing tattered covers and seats, purchase new once, and replace them. The job is quite simple since all you have to do is unscrew anything that needs unscrewing and put the replacement in place.
You can, however, seek the services of a qualified repairman to ensure proper installation of the components. After making the replacement, your bike will start achieving a new look, and its comfortability will improve significantly. Doing so is also going to make your motorcycle reliable and increase the protection of the delicate parts. It is among the essential ways of making your motorbike look new that you cannot ignore.
High-pressure washing is among the few ways to make your motorcycle extremely clean. The high pressure of water is going to remove any dirt, mud, or dust that is on the bike. It is also going to ensure the removal of any hidden debris from wherever they are hiding. That is, however, not enough to get your ktm motorcycles clean enough. Places such as around the engine require you to use a hand brush and some detergent. Pick a brush with a plastic handle and nylon bristles to avoid scratching your bike’s paint.
Brush the tires and other sections that are greasy and grimy. The work of the detergent is to wash away the grease without leaving any spot effortlessly. If there are parts on the bike that has rust, use sandpaper to do away with the rust. The item tends to be very useful when it comes to scrubbing off tough stains and rust from the surface of any component. It usually makes work much easier, and the finish is always stunning.
Don’t Just Wash
Washing is not enough for a dirt bike. You need to proceed further. First, leave your bike to dry off completely. You should not place your motorbike under direct sunlight. That is because doing so may lead to decolorizing the metallic and plastic parts of the sun. It is also going to weaken some parts. So instead of leaving it under direct sun for quick results, go ahead and dry it under the shade.
You should then use a clean piece of dry clothing with some polishing solution to polish the bike. The method tends to create a layer on your bike parts that protects it from harsh elements. You can then proceed by waxing your motorcycle so that you may give it the shine it came with the first day. Of all the processes of making a bike look new, this is the one that tends to provide it with an incredible finish that is desirable.
Do the tires need changing?
Inspect the tires to see if they need changing. Remember, the tires do plenty of jobs from carrying your whole wait and tearing through the tarmac to ensure you get where you are going. In the process, they tend to undergo wear and tear, which erodes the integrity of the rubber, and once that happens, the tire loses traction. A tire that lacks the grip required on the road can easily skid and cause an accident, and that means extra cost for medication.
Continued wearing of the tire can end up affecting the rims, and that may lead to expensive repairs. So once you see any signs that indicate the tires are in poor condition, don’t hesitate to make the changes. That is how to give your bike a new look and ensure your absolute safety while on the road. Ensure you check the replacement tires to see that they fit perfectly and that the installation is correct.
Paint If Needed
Another thing you need to do is paint the parts that are completely worn off and ruined by rust. It is also the right way of making the faded or dull paint beautiful and vibrant again. You will know your bike requires fresh paint if it has more scratches, and most of its paint is flaking off. Just like any other equipment, giving your bike a new paint job is not easy, neither is it cheap. You also need to pick the type of paint that looks like the one on the motorcycle if you want to maintain uniformity.
The great thing about painting is that it gives your motorcycle its original look. You can also include a motorcycle luggage rack so that you don’t have to worry about your tools scratching the paint again. You need to get an expert painter to deliver neat and detailed work.
With the ways above, your motorcycle is going to have a shiny look with a glossy feel. It is also going to perform remarkably well thanks to tire replacement. If you add this to your repair routine, then no one will suspect you are driving your old bike. The polish is going to protect the paint and the waxing will give it a glossy brand new finish. The only thing you need to do is to take every point seriously.